At one point or another we will all need a crystal crusher, this is a way to have one made for just a few dollars:
Go to a welding shop and ask them to cut you a piece of pipe of 1 1/2" (one and a half inch) 10 inches long,
Have them weld you a small steel plate in the bottom, 3/8 " or 1/2 " thick big enough so your crusher will stand up by it self, 3 or 4 inches is enough
Then have the welder find you a SOLID piece of round stock that will fit inside the pipe, it does not have to be a tight fit, you want it to be somewhat loose fit in that pipe
Have the welder cut that solid piece of stock 4 or 5 inches longer than your pipe, (14 or 15 inches)
That is it you now have a crusher
Put some crystals in pipe, the solid stock on the top, take your hammer (a large hammer, a little one will not do), and have at it
A good idea : when you are done with your crushing, spray a little rescue remedy on the crystal powder: because you just have crushed living things and it is good to take the stress out of them
j
