New Thoughts

hjkljhlkl
Posts: 199
Joined: 22 May 2024, 12:40

Re: New Thoughts

Unread post by Josh »

This will give you 81 pieces, now you will really think you are in the paving business :lol: :lol: :lol: , actually you will be in the flying business, it may be hard to keep your self on the ground with these
Simplicity; high tech magic
You can try also with 9 leaves of any tree, and then layer 9 more..etc..ask the tree first
We are going somewhere :o
Let us not forget, the higher your ethics, the more powerful your pieces
Josh
Posts: 130
Joined: 22 May 2024, 12:41
Location: Australia

Re: New Thoughts

Unread post by Monsoon Gecko »

Yeah. it's do able, with effort and time...factory mode, but I reckon I'd hit the ceiling by the 6th lot ,, ha ha Might do a couple more lots to experiment....eventually.
Also, I,m assuming that despite the energy output, plaster is still diamagnetic....like limestone, Anyone know? So I'm wondering how a paramagnetic disk alternating would help and what to make it from...I mean I have the highly paramagnetic rock chips available....maybe thin disk set in resin, concrete , plaster? All the ancient cultures from standing stone, pyramids , temples , towers and cathedrals etc use this energy generated by use of paramagnetic and diamagnetic stone.... but for specifics and how to I have no clue. Just speculating...anyone got any thoughts ?
Posts: 199
Joined: 22 May 2024, 12:40

Re: New Thoughts

Unread post by Josh »

Postby josh on Sun Sep 26, 2010 10:13 am

You can always make a thin slurry with your paramagnetic earth and a bit of plaster to keep it together, 1/2" thick disk to go in between the larger Plasterite.

Now let us look at "the past", I may be entirely wrong on this, then again...
All of those "great" culture may have stayed around for a long time, but they were still under the slave/master relationship and they eventually failed; the use of the higher technology was for privilege few, in truth it might have help with the crops, but it was mostly for the use of the Illuminati of the day.


So what they did at the time did not not bring a lasting peace or an enlighten behavior, therefore our medicine must be different, we may use some of their technologies, but our is and will be different because our intent is different


So what is it that we are doing with all of this new ideas; we are attempting to change to frequency so that ALL of humanity finds it self in a new paradigm of healthy ethic, absolute honesty, in service to others, rather then total service to self as it has been for countless eons.
This is the why of the big and energetic devices; the further the field affect the more people are hopefully coming under the new and improved :lol: :lol: way of being. .....................I may be dreaming standing up............somebody slap me please so I wake up.


Josh
Posts: 130
Joined: 22 May 2024, 12:41
Location: Australia

Re: New Thoughts

Unread post by Monsoon Gecko »

Postby monsoon gecko on Fri Oct 08, 2010 9:26 am



Well I went ahead and made 10 thin 1/2 inch plates loaded with paramagnetic rock chips...one broke in half...After drying, I stacked them to see.
They seemed quite energetic by themselves, but when placed alternating, in-between the 2 inch plates, the whole unit was noticeably stronger.
So all up, 9 x 2inch x 12inches across and then alternating 9 x1/2inch thick plates loaded with paramagnetic rock
Have not yet sourced spacers to trial an air gap between layers but eventually will test that.
Also the script is makeshift and needs to improve
Noticed after coming home from school and sitting to relax, how strongly it radiates only a couple meters away.
This has happened every time I go out.....seems stronger than the giant cones as I have not acclimatized to the energy as I have done
with the other devices...still noticeably feel it each time I walk into room...getting into 2nd week of trial.
Left a flagon of water on it overnight . It was really charged and tasted crisp and sweet......similar to pillowed water.
Layered multiple pieces really multiply energy .
Funny, I noticed one group of students at school pooling their freshly made pieces and stacking together on their desk. Didn't ring a bell at the time
but interesting on afterthought. Others just carry them around like pets........It's all entertaining...ha ha !
Posts: 37
Joined: 22 May 2024, 12:49

Re: New Thoughts

Unread post by Lightning »

Hi Monsoon Gecko :-),

Please hear me out and try this if you want to.

:arrow: Confession- I am extremely energy-sensitive and visionary, etc, etc, etc.

This is my vision:
8 layers of discs, alternating para and diamagnetic.
Above the 8 layers an airspace.
1 more disc above the airspace, with a point on one flat face, positioned to point straight upward.
Position shells in the airspace with the small ends facing outward in multiple directions (May not need the shells to work, but they will act as a venturi if present, may get you more range).

It is a tower of Light. :idea:

That's it. I will build this some day, and will post here when I do.

Namaste,

Linda :geek:
Posts: 130
Joined: 22 May 2024, 12:41
Location: Australia

Re: New Thoughts

Unread post by Monsoon Gecko »

Postby monsoon gecko on Sat Oct 09, 2010 3:37 am

Thanks Linda....I'll give it a try ....have heaps of spiral pointy shells.
Posts: 130
Joined: 22 May 2024, 12:41
Location: Australia

Re: New Thoughts

Unread post by Monsoon Gecko »

by monsoon gecko on Sun Oct 10, 2010 5:43 am

Radionics device progress
Yo...gifters, here's a few photos to illustrate trial so far,,,info in previous posts....
Guess it's a waste of time dowsing ? Ha ha


http://s814.photobucket.com/xxxx- (link down - thus webmaster put the pics here)



DSC01460.jpg
DSC01460.jpg (60.24 KiB) Viewed 4085 times

DSC01469.jpg
DSC01469.jpg (47.84 KiB) Viewed 4085 times

DSC01501.jpg
DSC01501.jpg (41.73 KiB) Viewed 4085 times

DSC01502.jpg
DSC01502.jpg (51.67 KiB) Viewed 4085 times

DSC01517.jpg
DSC01517.jpg (50.52 KiB) Viewed 4085 times

DSC01520.jpg
DSC01520.jpg (41.6 KiB) Viewed 4085 times

DSC01529.jpg
DSC01529.jpg (31.22 KiB) Viewed 4085 times

DSC01530.jpg
DSC01530.jpg (23.5 KiB) Viewed 4085 times

DSC01578.jpg
DSC01578.jpg (33.82 KiB) Viewed 4085 times


DSC01581.jpg
DSC01581.jpg (38.5 KiB) Viewed 4085 times


DSC01583.jpg
DSC01583.jpg (41.92 KiB) Viewed 4085 times


DSC01594.jpg
DSC01594.jpg (31.15 KiB) Viewed 4085 times



DSC01595.jpg
DSC01595.jpg (26.39 KiB) Viewed 4085 times



DSC01596.jpg
DSC01596.jpg (36.62 KiB) Viewed 4085 times



DSC01598.jpg
DSC01598.jpg (36.99 KiB) Viewed 4085 times



Comments welcome






( admin note : of course all links are down .....so I post the pics in here )
Posts: 199
Joined: 22 May 2024, 12:40

Re: New Thoughts

Unread post by Josh »

Postby josh on Sun Oct 10, 2010 12:22 pm

Wow Stephen, do you have to put lead shoes to be near the whole thing, nice work
What did use to separate each plate
Good medicine
j
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest