Plaster Orgonite

[gifter]

Hi Josh
Wanted to try the plaster ,went to the hardware store ,4 lbs for $6.99 gosh that was high priced. Tried Wally World ,8 lbs for $5.88 now that was more like it.
Anyway was excited to get something made. Read the mixing ratio's, come up with this is simple 1 water 2 plaster. Came up with the amount I needed and started mixing up a batch.
To make a long story short ,when I came up with the pancake type thickness I was ready to pour, went to pour and it was already thickened up where it wouldn't pour so I added a little water to thin it out , and more water,and more water and still had to spoon it out into the mold , moved it around in the mold even adding more water to get it thin enough to add what I wanted into the matrix.
I made 3 different pours and my results were the same. Is their some secret on how to mix this stuff up without it going nuts on me???
I poured this Sunday afternoon and its still mushy ,looks like in a couple more days it might be ready to take out of the molds, if it hardens at all??
Need some pointers on how to mix this plaster stuff ??
For whatever its worth, I asked a very gifted person about the use of the plaster, answer was Great . The Gemstones,coils,crystals or whatever you put into the mix is what makes it work. That is why just plain wall board isn't a generator of energy by itself. And yes plaster is just selenite .

Gifter

[Josh]

OK Gifter, what I have found with the plaster is that you must be fast, and I always add a little more water then what is called for, if the mix require one quart of water I will add one cup extra.
Mix it quickly, put it in the mold, halfway put some stones, pour the rest and add the rest of the stones. Do not wait, as soon as it is mix: pour it; I have had plenty of false start myself AS a rule it seems to harden within 10 to 20 minutes, and there is also a bit of heat generated, but not that much.
I get my plaster from one of the two Home Depot or Lows, and I am paying $27 for 25 lb, I am certain that if I go to a construction supplier I will find it in 50lb bags for not much at all.
josh

[gifter]

Thanks Josh
Will be much faster than before. So 8 lbs for $5.88 is a cheap price ( 24 lbs would be $17.64)( 32 lbs be $23.52).
So will what I made already,will it harden or is it all hopeless??
Thanks Again
Gifter

[Josh]

No not hopeless, if you have put your stones in it, you can take your failed plaster and put it in a bucket of water, it will dissolve and you can salvage your stones, Yes you found a good price, I will look around for larger quantities, and see, but so fare you did good at wally mart
josh

[Josh]

I just found this on line:

http://www.idealtruevalue.com/servlet/the-38762/Detail

50 LB, Bag, Diamond Interior Finish Plaster, UPC: 0 81099 00109 3.

50 LB, Bag, Diamond Interior Finish Plaster, UPC: 0 81099 00109 3.

SKU: 830299

Model 162640-RDC06

UPC 0

50 LB, Bag, Diamond Interior Finish Plaster, UPC: 0 81099 00109 3.

This item normally ships in 5-8 days
U S GYPSUM

Quantity On Hand: 19
PRICE: $7.25
Buy With Confidence. Our checkout is secured with SSL. No one ever sees your credit card information.

Quantity:

E-mail a friend about this item.

Return to Cat

I Think there may be some hardware stores around here that would have that, $ 7.25 for 50 lb wow

[Nepipemi]

What is the difference between plaster of Paris and interior finish plaster?

[Josh]

I think one may be finer than the other but I shall enquirer................I called the White House.... they had no idea
j

[Josh]

Another one:

http://www.idealtruevalue.com/servlet/Categories
j

[Monsoon Gecko]

Yo Josh....what a buzz. ! A new technique that works...in fact PUMPS. !
Got plastered and made 3 Hhg's yesterday.
One in s/steel pyramid, large glass martini and cylinder plastic takeaway away container.
It was quite a wet mix...crystals sank to bottom...even thought it wouldn't harden.....poured
off half cm of water that accumulated on top of moulds during hardening.
Sprayed silicon release in the pyramid and martini...all came out smoothly.Poured into another
glass and a ceramic bowl with no release agent <and no crystals ><made too much plaster > and
they came out perfectly too. <will make great pavement chalk at school Ha. >

The important thing here is , I can use all of my normal moulds safely...glass, silicone and s/steel !
Even the giant glass vase for a plaster Broadcaster.!

I must share with you my energy sensitivity...Right fom the very first Tb;s , I could feel the orgone
field. My best desciption is like a spiritual pressure to my forehead...third eye ?
I have made many devices since and each new one takes some getting used too. eg. Cb's ,standard
and induction type..114 and underground cloud buster UCB , peacemaker PM. The last 3, I discovered on
Etheric Research Forum. I couldn't go near the 114 for a couple of days....even brought first helicopter. !
Next was the Broadcaster and now Plaster Orgonite...I can't believe the energy given off by these
plaster Hhg's....very powerful orgone field...and I can make them anywhere ,anytime.

[Monsoon Gecko]

continued..

I used quite a few crystals and minerals...most from previous ebay purchases., mainly strung chip beads.
The list includes : lapis lazuli. sodalite, tourmaline, kyanite, ruby chips, mica flakes, tiger eye, amethyst,
rose quartz .garnet, sugalite, hematite, forrest agate, and turquoise. Also , included was a chunky 1 inch +
smokey lemurian quartz point.

I have spent half a day hammering the rest of my stones.< of course I've Kept a few. >. This is for two reasons.
1. Apparently. smaller pieces and powdered work better . so now largest broken pieces 5mm.
2. I'll be making Hhg's with school students this week in my favourite teacup size glass moulds..actually old punchbowl set !
I want to preserve my resources. I know what kids are like...they'll want to use more than is necessary. so this way they are limited to a pinch or two of each sample.....unbelieveable...I'm actually looking forward to going to work..Ha ha ha .

Well the spiritual pressure is still there today, though not as intense...guess I'm getting used to this strong new orgone field ! !

Thankyou Josh for sharing this new technique......OUTSTANDING !